- iv -
• Ground the unit.
-
Do not connect the ground wire to gas or water
pipes, lightning rods, or telephone ground lines.
Improper grounding may result in electric shock.
• Install the power cable so that tension is not
applied to the cable.
-
Tension may cause the cable to break and generate
heat and cause a fi re.
• Install a leak circuit breaker, as required.
-
If a leak circuit breaker is not installed, electric shock
may result.
• Use power line cables of suffi cient current
carrying capacity and rating.
-
Cables that are too small may leak, generate heat,
and cause a fi re.
• Use only a circuit breaker and fuse of the
specifi ed capacity.
-
A fuse or circuit breaker of a larger capacity or a
steel or copper wire may result in a general unit
failure or fi re.
• Do not wash the air conditioner units.
-
Washing them may cause an electric shock.
• Be careful that the installation base is not
damaged by long use.
-
If the damage is left uncorrected, the unit may fall
and cause personal injury or damage property.
• Install the drain piping according to this
Installation Manual to ensure proper drainage.
Wrap thermal insulation around the pipes to
prevent condensation.
-
Improper drain piping may cause water leakage and
damage to furniture and other possessions.
• Be very careful about product transportation.
-
If the unit weighs more than 20kg, carry the unit with
more than one person.
-
Some products use PP bands for packaging. Do not
use any PP bands for a means of transportation. It
is dangerous.
-
When transporting the unit, support it at the specifi ed
positions on the unit base. Also support the unit at
four points so that it cannot slip side ways.
• Safely dispose of the packing materials.
-
Packing materials, such as nails and other metal or
wooden parts, may cause stabs or other injuries.
-
Tear apart and throw away plastic packaging bags
so that it is out of reach of children. If children play
with a plastic bag which was not torn apart, they
face the risk of suffocation.
