Mitsubishi Electric PURY-P120Y(T)HMU-A, Руководство по обслуживанию

Страница: 61 / 387

[
II
Restrictions ]
- 52 - HWE0803A GB
1) To connect P06 - P18 models of indoor units use
the reducer that is supplied with the BC controller.
2) To connect P36 - P96 models of indoor units (or when the
total capacity of indoor units exceeds P31), use a junction
pipe kit and merge the two nozzles.
3) To connect multiple indoor units to a port (or to a junction pipe)
ΠMaximum total capacity of connected indoor units: P30 or below (in a system with a junction pipe: P96 or below)
ΠMaximum number of connectable indoor units: 3 units
ΠBranch joint: Use CMY-Y102S-G2 (optional accessory).
ΠRefrigerant pipe selection (size of the pipes A and B in the previous page) : Select the proper size pipes based
on the total capacity of the downstream indoor units, using the table below as a reference.
Unit : mm [inch]
Total capacity of indoor units Liquid pipe Gas pipe
P54 or below ø9.52 [3/8"] ø15.88 [5/8"]
P55 - P72 ø9.52 [3/8"] ø19.05 [3/4"]
P73 - P96 ø9.52 [3/8"] ø22.2 [7/8"]
Liquid pipe side: 6.35[1/4"]ID
Gas pipe side: 12.7[1/2"]ID
Liquid pipe side:3/8F
(Flare connection)
Gas pipe side:5/8F
(Flare connection)
Note) Use the flare nut that is supplied with the BC controller.
50 [1-31/32"]
Liquid pipe side: 9.52[3/8”]ID
Gas pipe side: 19.05[3/4”]ID(*1)
234 [9-7/32"]
Supplied with a thermal insulation cover
Liquid pipe side:3/8F
(Flare connection)
Gas pipe side:5/8F
(Flare connection)