Mitsubishi Electric Melsensor CF26-LR, Руководство по настройкам

Страница: 99 / 112

APPX
Appendix 9 Setting an IP Address to a Code Reader (DHCP)
97
A
Appendix 9
Setting an IP Address to a Code Reader
(DHCP)
In the default setting of a code reader, the IP address is automatically set using DHCP server. This section explains the
procedure for changing the setting of the code reader in which a static IP address has already been set to the setting whose
the IP address is automatically set using DHCP.
Start SetupTool.
 Click [Repair & Support] on the left side of the SetupTool screen and select a code reader icon displayed under the
"Network" section.
 After the setting status of the code reader IP address is displayed on the right side of the screen, check that "Use Static IP
Address" is selected.
 Select "Use DHCP Server."

Click the [Apply] button.
Wait for the code reader to be restarted and the IP address to be changed. (Time required: 30 sec)
The IP address is automatically set after starting the code reader.
Ò
Ò
Ó
Ô
Õ