Mitsubishi Electric FR-CC2-P, Инструкция по эксплуатации

Страница: 93 / 184

(E) Environment setting parameters
92
PARAMETER
 Unlocking a password (Pr.296, Pr.297)
• There are two ways of unlocking the password.
• Enter the password in
Pr.297 . If the password matches, it unlocks. If the password does not match, an error occurs and the
password does not unlock. During Pr.296 = any of "100 to 103, 105 or 106", if password unlock error has occurred five
times, correct password will not unlock the restriction. (Password lock in operation.)
• Perform all parameter clear.
NOTE
• If the password is forgotten, it can be unlocked with all parameter clear, but doing so will also clear the other parameters.
• All parameter clear cannot be performed during the operation.
• For the all parameter clear method, refer to the following.
(For the operation panel, refer to page 131 for the Mitsubishi inverter protocol of RS-485 communication, refer to page 119 .)
 Parameter operations during password locking/unlocking

Correct password will not unlock the restriction.
NOTE
• When the password is being locked, parameter copy using the operation panel is not enabled.
Parameters referred to
Pr.77 Parameter write selection page 90
Operation
Password unlocked Password locked Password lock in operation
Pr.296 = 9999
Pr.297 = 9999 Pr.296

9999
Pr.297 = 9999
Pr.296

9999
Pr.297 = 0 to 4 (read value)
Pr.296 = 100 to 103, 105, 106
Pr.297 = 5 (read value)
Pr.296
Read    
Write  
 
Pr.297
Read    
Write

  

Parameter
clear execution
 
 
All parameter
clear execution
   
Parameter
copy execution
 
 
 : Enabled,

: Disabled