Mitsubishi Electric FR-CC2-P, Инструкция по эксплуатации

Страница: 132 / 184

Parameter clear / all parameter clear
PARAMETER
131
5
5.8
Parameter clear / all parameter clear
POINT POINT
• Set "1" to Pr.CLR Parameter clear, ALL.CL All parameter clear to initialize all parameters. (Parameters cannot be cleared
when Pr.77 Parameter write selection = "1".)
• Terminal function selection parameters are not cleared with Pr.CL.
• Refer to the parameter list on
page 170 for availability of parameter clear and all parameter clear for each parameter.
Operation
1.
Screen at power-ON
The monitor display appears.
2.
Parameter setting mode
Press to choose the parameter setting mode. (The parameter number read previously appears.)
3.
Selecting the parameter number
To perform a parameter clear, turn to , and to perform all parameter clear, turn it to and press
. " " (initial value) appears.
4.
Parameter clear
Turn to change the set value to " ". Press to enter the setting. " " and " " ( ) blink
alternately after parameters are cleared.
 Turn to read another parameter.
 Press to show the setting again.
 Press twice to show the next parameter.
Setting
value
Description
Pr.CLR Parameter clear ALL.CL All parameter clear
0 Initial display (Parameters are not cleared.)
1
Returns parameters excluding terminal function
selection parameters , etc. to their initial values.
Returns all parameters which can be cleared
including
terminal function selection
parameters to their initial values.