Instruction Manual MIT-SCAN-T3
Version 02/2021
Page 61
This data can then be sent to the MIT-SCAN-T3. The transferred data
can be found in the measuring device in the menu item Measure -
Prepared measuring points.
6.3
Measurement
The app automatically recognizes the start of the measurement with
the MIT-SCAN-T3, all data is transferred to the phone. The user
receives an overview of the measurement information and all relevant
data that is displayed at the end of the measurement (the reflector
type recognized or set before the measurement, the measured layer,
the measured layer thickness and the value of the material quality).
The material quality can be used to assess the quality of the measuring
point and is ideally between -1 and 1. A checkbox at the top right
indicates whether GPS data is available for the measuring point.
With a click on
the measurement curve data can be displayed and
shows any error messages that may be present for the
measurement.
A table with the last ten measurements is displayed in the lower part of
the screen.
Fig. 56 Measuring result
