Instruction Manual MIT-SCAN-T3
Version 02/2021
Page 55
5.8.3
Calculations in the measurement sheet
The form sheet shows the measured layer thickness for each layer in
separate columns (s. Fig. 36, p. 43). If layer thickness determination of
several layers is performed at the same measurement point, the
program automatically calculates individual layer thicknesses for the
following layer systems (s. Fig. 49):
Two-layer construction
Three-layer construction
MIT Project Software averages the measured values if several results
are available with same course setting and location. This presetting can
be made in menu item “Extras” (s. sec. 5.2, p. 45).
By clicking a measurement value or calculated layer thickness, the
values in the form sheet used for calculation are marked green in the
tab.
Fig. 49 Calculation of layer
construction
