Instruction Manual MIT-SCAN-T3
Version 02/2021
Page 60
6.1
Start Screen
After starting, the app automatically searches for a layer thickness
measuring device nearby. To do this, Bluetooth must be activated on
the phone. The corresponding device is selected and connected. The
connection request is then confirmed on the MIT-SCAN-T3. The device
data is downloaded to the phone. The user receives information on the
serial number, the date of the last calibration, the battery level and the
firmware version of the device (see Fig. 52, previous page).
6.2
Prepared measuring points
In this tab, prepared measuring points are called up and displayed.
Data can be edited, added or deleted. Changes can be transferred to
the MIT-SCAN-T3.
To edit an individual measuring point, the point is select and an editing
dialog opens by using the pencil symbol (see Fig. 54).
A new measurement project can be created with the “+” sign. The
name of the structure, the step size and the start and end of the
measuring points are specified in the corresponding dialog (see Fig.
55). In addition, a layout diagram can be created and a reflector type
can be specified for each layer to be measured.
Fig. 54 Prepared measuring
points
Fig. 55 Create new
measuring points
