Instruction Manual MIT-SCAN-T3
Version 02/2021
Page 17
2.2
Device number and firmware
Device number can be found on a label below the USB, headphone and
charger interface. Device number, firmware version and last calibration
date will also appear on the bottom line of the start screen after
power-on (s. Fig. 11).
2.3
Carrying strap
The attachment of the carrying strap is shown in Fig. 12. The carabiner
of the belt is inserted into the eyebolt at the upper end of the control
unit case. Open the loop at the other end of the belt, place it directly
below the control unit case around the tube and close it using the snap
button.
To release the snap button the knob (s. detail Fig. 12) must be pulled
upwards. If the mechanism is sufficiently relieved, the two components
are release from each other and the loop is opened. To lock the snap
button, the ball head of the pin must be pressed into the buttonhole
until both parts engage into each other.
The device with connected strap is shown in Fig. 1 (p. 7).
Fig. 11 Start screen
Fig. 12 Carrying strap
