Instruction Manual MIT-SCAN-T3
Version 02/2021
Page 14
The date of the last calibration will appear on the display when the
device is switched on. Additionally, the next calibration due date is
indicated on a calibration label on the device's probe (s. Fig. 8).
2
Thickness measuring device
The measuring device consists of two functional units (s. Fig. 9):
(1)
Control unit
(2)
Measuring probe
They are connected by a telescopic rod. The telescopic rod is secured
with tube locks (4).
The control unit is equipped with:
(5)
Display
(6)
Directional pad (D-pad)
(7)
Search key
(8)
Interfaces for a USB flash drive, headphones and charger
Coils for emitting and receiving signals are integrated in the probe. The
traversed measurement path is determined based on the front wheel's
rotation.
(1)
(6)
(8)
(5)
(7)
(4)
(3)
(2)
Fig. 9 MIT-SCAN-T3 design
