Instruction Manual MIT-SCAN-T3
Version 02/2021
Page 24
3.2
Measuring sites set up on MIT-SCAN-T3
Projects can be preset at PC with MIT Project Software (s. sec. 5.4,
p. 47). Alternatively, the projects can be set up directly on device on
site. For this, the item “Manual input” has to be selected from the
submenu “Definition of Measuring site”.
After activating the item “Project Data” in menu “Current Measuring
Site”, information about the current project can be entered by
confirming the
key (s. Fig. 21). In this context, all project relevant
parameters regarding the construction work can be entered (s. Fig. 22
below):
“Project”
Name of road or construction work (maximum five characters)
“Start Pos.” (Start position)
Data about starting point of the measurement
“Distance”
Distance between measuring sites (installed reflectors)
“Layer”
Information about layer structure (2- or 3-layer measurement)
“Reflector”
Preselection of installed reflectors
Fig. 22 Construction project
data
Fig. 21 “Manual input”
