Instruction Manual MIT-SCAN-T3
Version 02/2021
Page 51
To select isolated data sets:
Hold Ctrl key pressed and select single rows
To select single data set:
Left click with the mouse on the desired data set
Error message during measurement
Error messages which were displayed during the measurement are
displayed in the table (s. Fig. 36, p. 43) in “Error” column by their
abbreviation. By moving the mouse over the respective cell, all error
messages are displayed completely.
5.6
Correct and delete data
Information about location, layer type and position can be corrected
afterwards. Right-click on the relevant cell and input correct data
(s. Fig. 45).
To delete single data sets first mark the relevant row and press the
“Del” key.
Fig. 45 Correction of data
