Minuteman ERIDE 30, Руководство по обслуживанию

Страница: 39 / 86

7.1 Mechanical Components
7.1 Squeegee
Adjustment of the squeegee assembly.
The angle/pitch adjustment is the decisive factor in ensuring the assembly squeegee
blades lie evenly on the floor.
1. Park the machine on a level surface and lower the squeegee.
2. Loosen the counter nut on the screw (Fig. 7.1/3) and use the counter nut to adjust the
squeegee so that the ends of the sealing strips just make contact with the floor.
Fig. A (Fig. 7.2)
f f Turn the counter nut counterclockwise: Distance from sealing strip to floor is reduced in
the middle.
Fig. B (Fig. 7.2)
Turn the counter nut clockwise: Distance from sealing strip to floor is increased in the
iddl middle.
3. Switch the vehicle on and check the suction pattern. While driving, the sealing strips
must make a full, even contact with the floor (in the center and at both ends).
4. Tighten the counter nut of the adjusting bolt at 7 Nm (8.85 in lbs).
39