Minolta Di470, Расширенная информация

Страница: 265 / 364

Troubleshooting 7
Di470 7-1
7 Troubleshooting
7.1 If You are not Satisfied with Your Copy . . .
Symptom Possible cause Action
The image is too
light.
The exposure level for the
Auto Exposure Mode is set
to a light value. Change the exposure level
under User's Choice, see
page 6-26.
Manually set the exposure
to a darker level, see
page 4-62.
The exposure level has been
manually set too light. Manually set the exposure
to a darker level, see
page 4-62.
You have previously made
copies from a very dark
original. The copier requires toner
replenishment, see
page 6-19.
The toner bottle has just
been replaced.
The message Please
Replenish Toner is shown
on the display.
Replace the toner bottle,
see page 2-44.
The paper is damp. Replace the paper.
The image is too
dark.
The exposure level for the
Auto Exposure Mode is set
on a dark value. Change the Copy Density in
the User's Choice, see
page 6-26.
Manually set the exposure
to a lighter level, see
page 4-62.
The exposure level has been
manually set too dark. Manually set the exposure
to a lighter level, see
page 4-62.
The entire surface of the
original glass is dirty. Clean the original glass,
see page 8-1.
The original is not flat
against the original glass. Place the original on the
original glass correctly,
see page 3-13.