Mindray SynoVent E5, Руководство оператора

Страница: 113 / 196

9-7
 [ Continuous ]: indicates that the nurse call signal lasts until the alarm ends, i.e. the
duration of a nurse call signal equals to that of the alarm.
4. Select [ Contact Type ] and toggle between [ Normally Open ] and [ Normally Closed ].
 [ Normally Open ]: normally open signals are used to trigger the nurse call function.

[ Normally Closed ]: normally closed signals are used to trigger the nurse call
function.
5. Select [ Alarm Level ] and set the alarm level for nurse call signals triggered alarm.
6. Select [ Alarm Type ] and select the alarm type to which nurse call signals triggered
alarm belongs.
If no setting is made for [ Alarm Level ] or [ Alarm Type ], nurse call signals will not be
triggered whatever alarm occurs.
WARNING

Do not rely exclusively on the nurse call system for alarm notification. Remember
that the most reliable alarm notification combines audible and visual alarm
indications with the patient’s clinical condition.

Use the specified nurse call cable when connecting with the hospital’s nurse call
system through the nurse call connection port. Failure to do so may burn the
machine and produce electric shock hazard.
9.11 Alarm Test
9.11.1 Battery in Use Alarm
1. Connect the ventilator to the AC power, push hard key.
2. After the system powers on, disconnect the AC power.
3. Check if [ Battery in Use ] alarm is triggered, and the ventilator is powered by batteries.
4. Reconnect the AC power.
5. Check if [ Battery in Use ] alarm is reset, and the ventilator is powered by AC power.
9.11.2 Battery Depletion Alarm
1. Connect the ventilator to the AC power, push hard key.
2. After the system powers on and the battery is already fully charged, disconnect the AC
power.