Mindray ePM 10M, Руководство оператора

Страница: 72 / 364

7 - 6
◆
High Only
: Only when a high priority alarm is issued, the monitor automatically switches to the alarm
bed.
◆
High & Med
: If
Rollup Interval
is set to
Off
and when a high priority alarm or medium priority alarm
is issued, the monitor automatically switches to the alarm bed. If
Rollup Interval
is set to
10 sec
,
20
sec
, or
30 sec
and multiple remote beds issue alarms, the monitor cyclically displays the alarm beds
with higher priority in the order of alarm time. For example, if both high priority alarms and medium
priority alarm are issued, only beds with high priority alarms are cyclically displayed.
7.6 MLDAP
MLDAP refers to Mindray LDAP (Lightweight Directory Access Protocol). It is an independent process which can
be installed on eGateway or other application server (Windows). MLDAP provides user identity and
authentication.
The MLDAP server is connected with the hospital LDAP server. All monitoring devices are connected to the
MLDAP server to implement identity and authentication for the following operations:
■
Changing alarm settings
■
Changing arrhythmia settings
■
Accessing the
Maintenance
menu
7.7 Connecting the Wireless Network
You can add up to five wireless networks for the monitor. If connecting the current wireless network fails, the
monitor automatically connects other wireless networks in the order when they were added.
To manually switch the wireless network, from the system status information area on the top right corner of the
screen select
, and
select the desired wireless network.
7.8 Disconnecting the Wireless Network
To disconnect the wireless network manually, follow this procedure:
1. Swipe the screen from top down with a single finger.
2. Select
.
To reconnect the wireless network after it is disconnected manually, follow this procedure:
1. Swipe the screen from top down with a single finger.
2. Select
.