Mindray ePM 10M Скачать руководство пользователя страница 267

Страница: 267 / 364

30 - 3

■

The monitor housing and display screen are free from cracks or other damages

■

The power cord is not damaged and the insulation is in good condition.

■

Connectors, plugs, and cables are not damaged and kinked.

■

Power cord and patient cables are securely connected with the equipment and modules.

30.4.2

Performing Power-on Test

The equipment automatically performs a selftest at startup. Check the following items for the power-on test:

■

The equipment powers on properly.

■

The alarm system works properly.

■

The equipment displays properly.

30.4.3

Testing the Recorder

To test the recorder, follow this procedure:

Start a recording task to print waveforms and reports.

Check that the recorder functions correctly.

Check that the printout is clear without missing dots.

30.4.4

Testing the Network Printer

To check the printer, follow this procedure:

Start a printing task to print waveforms and reports.

Check that the printer is properly connected and functions correctly.

Check that the printout is clear without missing dots.

30.4.5

Checking the Battery

For information on battery check, see

28.6.2 Checking Battery Performance

30.5

Disposing of the Equipment

Dispose of the monitor and its accessories when its service life is reached. Follow local regulations regarding the
disposal of such products.

WARNING

•

For disposal of parts and accessories, where not otherwise specified, follow local regulations

regarding disposal of hospital waste.

Содержание ePM 10M












































































































































































































































































































































































Результаты поиска

Содержание ePM 10M

Отзывы:

Похожие инструкции для ePM 10M

Бренды по названию

Популярные бренды

Mindray ePM 10M, Руководство оператора

Результаты поиска

Содержание ePM 10M

Отзывы:

Похожие инструкции для ePM 10M

Бренды по названию

Популярные бренды