MIMAKI DS-1600, Руководство по эксплуатации

Страница: 98 / 172

- 3.16 -
Setting [LEFTmargin]
STEPS:
1. Select a type.(See page 3.3)
Here, select Type 1.
2. Press the [ENTER] key.
3. Press the JOG keys [ ] and [ ] to select
[MARGIN].
4. Press the [ENTER] key.
5. Press the JOG keys [ ] and [ ] to select
[LEFTmargin].
6. Press the [ENTER] key.
7. Press the JOG keys [ ] and [ ] to set a margin.
You can set a maigin in the range -9 mm to 95 mm in mm unit.
Here, set [10 mm].
8. Press the [ENTER] key.
9. Press the [END] key three times.
The menu returns to the LOCAL mode.
• This plotter sets the width of the printing area by detecting the position of the
fabric retainer. The left and right margins can be changed by changing the
position of the fabric retainer. Printing with the full width is possible by setting
the fabric retainer apart from the edge of the fabric.
S E T U P
S E L E C T
: T Y P E . 1
T Y P E 1
M E D I A CO M P . < e n t >
T Y P E 1
M A R G I N < e n t >
< < L O C A L > >
w i d t h : 1 2 7 2 m m
T Y P E 1
R I G H T ma r g i n < e n t >
T Y P E 1
L E F T m a r g i n
< e n t >
T Y P E 1
L E F T m a r g i n
< e n t >
T Y P E 1
L E F T m a r g i n
= 0 m m
T Y P E 1
L E F T m a r g i n
= 1 0 m m