MIMAKI DS-1600, Руководство по эксплуатации

Страница: 95 / 172

- 3.13 -
Deciding the priority of settings by the computer or the plotter [PRIORITY]
This function gives priority to either the printing conditions set on the computer or the printing
conditions set on the plotter.
Printing conditions can be set on data of the plotter and on data received from the computer
using the output software. If these printing conditions differ, priority is given to either of them
at the time when the printing operation is started.
HOST : The printing operation is performed with priority given to the printing
conditions set on the computer.
PLOT : The printing operation is performed with priority given to the printing
conditions set on the plotter.
Priority needs to be specified for each of the following items:
• PRINT MODE • INK LAYERS • DRYING TIME
• INK TYPE • REFRESH • MEDIA COMP.
STEPS:
1. Select a type. (See page 3.3)
Here, select [Type.1].
2. Press the [ENTER] key.
3. Press the JOG keys [ ] and [ ] to select
[PRIORITY].
4. Press the [ENTER] key.
5. Press the JOG keys [ ] and [ ] to select the
priority [HOST] or [PLOT] of the print mode.
Here, select [PLOT].
6. Press the [ENTER] key.
7. Press the JOG keys [ ] and [ ] to select the
priority [HOST] or [PLOT] of the ink layers.
Here, select [PLOT].
8. Press the [ENTER] key.
S E T U P
S E L E C T
: T Y P E . 1
T Y P E 1
M E D I A CO M P . < e n t >
T Y P E 1
P R I O R I T Y
< e n t >
T Y P E 1
P R I N T M ODE
: H OS T
T Y P E 1
P R I N T M ODE
: P L O T
T Y P E 1
I N K L A Y ERS : H OS T
T Y P E 1
I N K L A Y ERS : P L O T
T Y P E 1
D R Y I NG T I M E : H OS T