MIMAKI DS-1600, Руководство по эксплуатации

Страница: 56 / 172

- 1.38 -
11. Install the roll shaft with roll to the feeding unit.
Install the roll with reffering STEPS 1 to 10.
• Installing direction is different according to the
print surface.
• Set the roll so that the edge of the roll is placed
between the media set position.
12. On the feeding unit, set the “ROTATION” to the
feeding position and set the “MANUAL” to feed
the fabric approximately 3 meters.
To stop feeding, set the “AUTO.”
13. Pull out the fabric under the feeding tension bar
and then insert the leading edge of the fabric
between the driver roller and pinch roller.
• When using the lapel bar, see page3.5.