MIMAKI DS-1600, Руководство по эксплуатации

Страница: 30 / 172

- 1.12 -
Fablic retainer
If the edge of the fabric is curled or it is raised, it may be caught by the head or inferior ink
discharge may occur.
To avoid this trouble, use the fabric retainer.
• The fablic retainer also act as a detection board which detects the printing
width. Printing with the full width (DS-1600: up to 1620mm width, DS-1800:
up to 1850 mm width) is possible by setting the fablic ratainer to a position
apart from the edge.
• If a fablic retainer is stained by ink, it can be removed for washing. Remove it
from the end of notch in both side.
• When using fabric retainer, be sure to adjust the head height to 3mm or
more.
When raising height of the fabric retainer, be sure to adjust the head height
according to the height of it.
Using them with a low head height may cause failure.
Fabric retainer
Detection line of Fabric width