MIMAKI DS-1600, Руководство по эксплуатации

Страница: 151 / 172

- 5.5 -
Troubles for which error message are given on the LCD
If something is wrong with the plotter, the buzzer sounds and a corresponding error message
is given on the LCD.
Take an appropriate corrective measure in accordance with the message.
Warning message
Warning message Cause Corrective measure
Ink cartridge is not loaded on
the ink station.
The ink cartridge has run out of
ink.
The amount of ink remaining in
the ink cartridge is insufficient.
Time to replace the wiper in the
capping station with a new one
has come.
Time to remove ink adhered to
the bottom surface of the slider.
Cleaning period of the ink on the
wiper shaft of the capping sta-
tion.
Head ID has not been regis-
tered.
Time to replace the batery
Attach the ink cartridge(s) corre-
sponding with the number(s)
shown on the display.
Printing can be continued in file-
by-file basis by pressing the [RE-
MOTE] key. However, it is recom-
mended to replace the wiper as
soon as possible.
Perform the carriage-out function
of the station maintenance
(pages 4.8) to clean the wiper
shaft of the capping station.
Turn off the power to the plotter
and turn it on after a while. If the
same error message appears
again on the LCD, contact your
local distributor to call for service.
Contact your local distributor to call
for service.
I n k C a r t r i d g e
1 2 3 4 5 6 7 8 A B C DE FG H
I n k E n d
1 2 3 4 5 6 7 8 A B C DE FG H
I n k N e a r E n d
1 2 3 4 5 6 7 8 A B C DE FG H
W i p e r
R e p l a c e W i p e r
W i p e r
C l e a n W i p e r S h a f t
H e a d
H e a d I D U n R e g i s t .
R E P L A C E B A T T E RY