MIMAKI CG-100SRIII, Руководство по эксплуатации

Страница: 66 / 172

3-16
Mark blurred
If the mark is blurred, a wrong mark origin can be detected, thus resulting in deviated cutting.
Precautions on registration mark detection
Observe the following precautions on registration mark detection.
• To ensure that the distance between registration marks is equal to the cutting length, input the distance between
the printed marks found by the mark detecting function. (DIST.REVI P.3-18)
In this case, scale compensation between the registration marks overrides distance compensation. After that, if
you change the distance compensation value, the scale compensation between the registration marks will be
invalid.
• When you retry sheet detection, sheet inclination compensation, scale compensation between registration
marks, and the position of the origin are cleared.
• Once the plotter detects marks, it will set the origin at the location of TP1.
You can change the position of the origin to a different location using jog keys ; the origin at the new location
supersedes the origin at TP1.
• Locate registration marks so that the line connecting the corners of four marks forms a rectangle.
Registration marks arranged unevenly can result in deviated cutting.
• Automatically disabled if the rotation function is specified.
Set for Detecting the Registration Marks
When you want to cut the data with registration marks, you must set the following without fail.
1
Press the key in the local mode.
2
Press the jog key or to select [SET UP] .
3
Press the key.
4
Press the key.
OK OK NG NG
FUNCTION
ENTER/HOLD
ENTER/HOLD