MIMAKI CFL-605RT, Руководство по эксплуатации

Страница: 76 / 170

3-8
Functions in the Jog Mode
Digitization operation
The coordinates of the plotted figure relative to the origin are displayed on the host computer.
Upon receiving the digitization command (DP;) from the host computer, the plotter is ready for digitization
operation.
To conduct digitization, install a sheet with patterns to select points on it.
1
Set the plotter in the remote mode and make it receive
the digitization command from the host computer.
• The display will change as shown at right.
2
Move the pen with a jog key or
until the pen tip reaches a given point of the pattern.
• The coordinates relative to the origin will be displayed.
• If you set the step to a smaller value using the jog step function, you may select a desired point with
increased accuracy. (
P.3-28)
3
Press the key.
• The plotter records the point of the pen head.
• The plotter receives the coordinate output command (OD;) from
the host computer.
• The digitization operation is available only with an application software that incorporates a digitization
function. Refer to the instruction manual for the application software for how to use the digitization
function.
< REMOT E > 1 3 5 6 KB
PEN 2 0 1 2 0
< REMOT E > 1 3 5 6 KB
* * D I G I T I Z E * *
< D I G I T I Z E > mm
X : 1 0 0 . 0 Y : 2 5 0 . 5
< REMOT E > 1 3 5 6 KB
* * D I G I T I Z E
* *