MIMAKI CFL-605RT, Руководство по эксплуатации

Страница: 60 / 170

2-20
Checking the Status Between Tools
Make a test cut to check the status between the tools (pen and tial cutter or pen and crease roller).
Check Method
Draw the pattern with the pen. Then make a test cut at the same position using the tial cutter or crease roller to
check the status between tools.
Appropriate remedies are described below for ten types of sample.
• Some samples require the adjustment of one item, while others require the adjustment of multiple
items. Refer to the sample to identify the items requiring adjustment.
• The description below refers to the pen and tial cutter. For the crease roller, read "tial cutter" as
"crease roller."
Overview
The tial cutter is displaced with respect to the center of the pen,
regardless of the direction of movement.
Remedy
Adjust the Offset in Adjust Cutter in tool adjustments. ( P.6-3)
Overview
The cut is rotated clockwise or counterclockwise.
Remedy
Conduct Adjust

in Adjust Cutter in tool adjustments. ( P.6-
3)
Overview
Cutting start point is too far forward or backward.
Remedy1
Adjust the START CORR. value in the cutting conditions.
(
P.2-11)
Remedy2
Adjust Pattern A in Adjust Eccentricity in Adjust Cutter in tool
adjustments. (
P.6-3)
Sample A
Sample B
Sample C