MIMAKI CFL-605RT, Руководство по эксплуатации

Страница: 132 / 170

4-16
Check the sensor for the registration mark detection
Prepare the sheet on which the registration mark is printed.
1
Make sure that the plotter is in local mode.
2
Enter the jog mode by pressing the jog key or
3
Move the tip of the pen to the registration mark detection position by pressing the
appropriate ones of the jog keys
and .
• Perform registration mark detection at a position 1mm or more away from the registration mark.
4
Press the key to terminate the jog mode.
• The plotter returns to the local mode.
5
Press the key.
6
Select [MARK sensor] by pressing the jog key or
.
7
Press the key.
• If you move the head and sheet manually, you cannot perform the right response check. Be sure to
perform it via the following operations.
•
For conditions of already printed registration mark, refer to “Precautions when Creating Data
with Register Marks” (
P.4-2).
•
Set the buzzer sound to “ON”.
( P.3-26) The registration mark detection sound is not made if the
buzzer sound is set to OFF.
<
LOCA L >
A : S W I V E L
1 mm or
more away
: Mark detection position
Mark :
Type 1
Mark :
Type 2
< F U N C T I O N >


S E T U P [ E N T ]
FUNCTION
< F U N C T I O N >


MA R K S E N S O R [ E N T ]
< MA R K S E N S O R >


S E N S O R O F S [ E N T ]