MIMAKI CFL-605RT Скачать руководство пользователя

Страница: 12 / 170

Safety Precautions

For safe operation

Precautions in installation

CAUTION

Do not restart the power until 30 seconds after turn off

Do not put any matters on the cable

• If the device is restarted, do not turn on the

power until 30 seconds after turning off.
The device may be caused faulty function.

• Do not bend the power cable and the

communication  cable,  and  do  not  placed  any
matters.  These  cables  may  be  broken  and
heated,  the  power  cable  can  cause  fire  or
electric shocks.

Do not climb on top of the machine

Do not move your face in front of cut panel

• Please do not climb on top of the machine. It

may cause malfunction.

• Do not move your face and hands in front of the

cut panel while the unit is working.
The device can wind and touch your hairs or
hands.

Do not dress baggy suits and accessories

The device is moved by our service engineer only

• Do not work with dressing baggy suits and any

accessories, and also tie any long hairs.

• The device is too sensitive equipment, so in

case if you require movement of the unit, please
contact to our service engineer.

CAUTION

A place exposed to direct sunlight

A place that vibrates

• Do not install the device at a place where the

temperature of the cut panel surface exceeds
60?C. The cut panel can deform or break down.

• The device will fail to give correct results if

installed in a place that vibrates.

A place in which temperature and humidity

A place filled with dirt, dust or tobacco smoke

• Use the device under the following environment.

Operating environment:

10 to 35 C
35 to 75 % (Rh)

• The plotter is a precision machine.

Do not use it in a place that is filled with dirt and
dust.

A plate that is not horizontal

Near flammable materials

• If the plotter is not leveled, the plotter will fail to

give correct results. Also the tilted plotter can
break.

• When the blower is used fully open, the exhaust

port temperature becomes extremely high. Do
not place flammable materials near the blower
or in front of the exhaust port.

A place exposed to direct air blow from air conditioner., etc

• Cutting quality could be adversely affected.

Содержание CFL-605RT











































































































































































Результаты поиска

Содержание CFL-605RT

Отзывы:

Похожие инструкции для CFL-605RT

Бренды по названию

Популярные бренды

MIMAKI CFL-605RT, Руководство по эксплуатации

Результаты поиска

Содержание CFL-605RT

Отзывы:

Похожие инструкции для CFL-605RT

Бренды по названию

Популярные бренды