4
HISTORY
Press the Menu button and use the
buttons to
select HISTORY. Press OK. The last 20 measure
-
ments/calculations are displayed. Note, the measure
-
ments made to calculate surface area, total area,
volume, etc, are not stored in HISTORY. Only the
resulting calculation is stored.
Press the Clear/Power button to delete an entry.
Press the Menu button to return to the menu screen.
Additional measurements/calculations can be added
or subtracted from entries stored in HISTORY. Only
calculations of the same type (length, area, volume,
etc.) can be made.
To perform a calculation:
1.
Use the
buttons to highlight an individual
measurement from the HISTORY.
2. Press the OK button.
3. Make the measurement(s) to be used in the
calculation.
4. Press the OK button to save the new calculation
to HISTORY.
SETTINGS
UNITS -
Use the
buttons to select the desired
unit display.
AUDIO -
Use the
buttons to turn the audio beep
on and off. The meter will retain the on/off setting until
it is changed again.
LANGUAGE -
Use the
buttons to select the
display language. The meter will retain the language
setting until it is changed again.
MAINTENANCE
Care
• Clean the tool with a damp, soft cloth.
• Never immerse the device in water.
• Never use aggressive cleaning agents or solvents.
Error Message
If the error code 500 appears on the display, turn the
meter off and back on. If the problem continues,
return
the tool to the nearest service center for inspection.
Repairs
For repairs, return the tool to the nearest service center.
ACCESSORIES
WARNING
Use only recommended accesso-
ries. Others may be hazardous.
For a complete listing of accessories, go online to
www.milwaukeetool.com or contact a distributor.
SERVICE - UNITED STATES
1-800-SAWDUST
(1.800.729.3878)
Monday-Friday, 7:00 AM - 6:30 PM CST
or visit
www.milwaukeetool.com
Contact Corporate After Sales Service Technical
Support with technical, service/repair, or warranty
questions.
Email: [email protected]
Become a Heavy Duty Club Member at
www.milwaukeetool.com to receive important
notifications regarding your tool purchases.
SURFACE AREA
Height x Length
Make a height and a length measurement to calculate
surface area. The surface area is stored in HISTORY.
TOTAL AREA
(Height x Length 1) + (Height x Length 2) ...
Make a height measurement and multiple length
measurements to calculate total area. Continue to
make length measurements. When all length mea
-
surements are complete, press MENU to save.
The surface area is stored in HISTORY.
VOLUME
Length x Height x Depth
Make a length, height and depth measurement to
calculate volume. The volume is stored in HISTORY.
INDIRECT H/L (48-22-9803 only)
Determine the height and length using an angled
(hypotenuse) measurement and the level. The height
and length are stored in HISTORY.
!
INDIRECT HEIGHT (48-22-9803 only)
Determine the height using two angled length
measurements and the level. Use a tripod or other
stable surface to make two length measurements.
The height is stored in HISTORY.
