Miller OM-286308A, Руководство пользователя

Страница: 26 / 36

OM-286308 Page 20
PAIR
5-12. Pairing A Wireless Hand Control With A 14-Pin Transceiver
! Unexpected weld output can
cause electric shock. Remote
controls can turn weld output on
from distant locations. Discon-
nect 14-pin transceiver from re-
mote 14 receptacle and remove
the batteries from the wireless
foot control and/or wireless hand
control before servicing equip-
ment.
! Turn off welding power source be-
fore pairing a wireless hand con-
trol or wireless foot control to an-
other 14-pin transceiver. During
the pairing process, weld output
may be present on the welding
power source previously linked to
the wireless hand control or wire-
less foot control.
.
Pairing is only required for devices
purchased separately. The wireless
hand control and 14-Pin Transceiver
system and wireless foot control and
14-Pin Transceiver System are
paired when purchased as a system
or set. A wireless foot control or
wireless hand control can only pair to
a single 14-Pin Transceiver. The
14-Pin Transceiver can learn a new
wireless foot control or wireless
hand control address.
1 14-Pin Transceiver
2 Pairing Button (on 14-Pin
Transceiver)
3 Wireless Status Light (on 14-Pin
Transceiver)
4 Wireless Hand Control
5 Pairing Button (on top of Wireless
Hand Control)
6 Wireless Status Light (on Wireless
Hand Control)
To prevent accidental pairing to unin-
tended devices, the wireless hand
control must be within one foot of the
14-Pin Transceiver for successful
pairing to occur.
Press and release the Pairing Button (on
14-Pin Transceiver).
The Wireless Status Light (on 14-Pin
Transceiver) will indicate solid amber to
signify that the device is in pairing mode.
Both pairing buttons must be pressed
within the 10 second pairing mode
window. After 10 seconds the device will
exit pairing mode if no device is found.
If successfully paired, the Wireless Hand
Control Status Light will indicate flashing
green and the 14-Pin Transceiver will in-
dicate solid green.
If not successfully paired both the Wire-
less Hand Control and 14-Pin Trans-
ceiver Wireless Status Lights will indi-
cate solid red.
4
1
Ref. 803900-B / Ref. 805626-A
5
6
2
3