Miller OM-286308A, Руководство пользователя

Страница: 19 / 36

OM-286308 Page 13
SECTION 5 − INSTALLATION AND OPERATION
5-1. FCC Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy, and if not installed and used in accordance with instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
S
Reorient or relocate the receiving antenna.
S
Increase the separation between the equipment and receiver.
S
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
S
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications that are not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
FCC Class B - 2019-10
5-2. RSS (ISED) Compliance/Conformité au CNR (ISDE)
These devices contain licence − exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s
licence − exempt RSS(s). Operation is subject to the following two conditions:
S
This device may not cause interference.
S
This device must accept any interference, including interference that may cause undesired operation of the device.
Ces dispositifs contiennent un/des émetteur(s) − récepteur(s) exempt(s) de licence(s) qui se conforme(nt) avec un/des CNR exempt(s) de
licence(s) émises par Innovation, Sciences et Développement économique Canada. Leur fonctionnement est soumis aux deux conditions sui-
vantes :
S
Ces dispositifs ne doivent causer aucune interférence nuisible.
S
Ces dispositifs doivent accepter toutes les interférences, y compris celles qui pourraient provoquer un fonctionnement non dési-
ré du dispositif.
RSS2 - 2020-04
5-3. Specifications
Specification Wireless Foot Control Wireless Hand Control 14-Pin Transceiver
Power Supply 4 − AA Batteries 4 − AA Batteries 10 − 35 Volts AC or DC
Rated Range* 100 ft (30 m) 350 ft (107 m) N/A
Battery Life (Alkaline) TBD TBD N/A
Operating Humidity Range 0 − 97% 0 − 97% 0 − 97%
Operating Temperature Range -18
°
F to +122
°
F
-25 ° C to +50 ° C
-18
°
F to +122
°
F
-25 ° C to +50 ° C
-18
°
F to +122
°
F
-25 ° C to +50 ° C
Radio Frequency 2.4 Ghz 2.4 Ghz 2.4 Ghz
RF Power 8 dBm 8 dBm 8 dBm
Antenna Internal Internal Internal
Dimensions 11.5 in. (293 mm) D
5.75 in. (146 mm) W
2.09 in. (153 mm) H
1.73 in. (44 mm) w/Strap,
1.34 in. (34 mm) w/o
2.99 in. (76 mm) W
4.92 in. (125 mm) H
1.81 in. (46 mm) Dia
3.15 in. (80 mm) L
Weight 47 oz (1332 g) w/batteries 13.6 oz (387 g) w/batteries 2.56 oz (73 g)
FCC ID QOQBGM13P 2ASZL-301583 QOQBGM13P
Canada IC 5123A-BGM13P 24958-301583 5123A-BGM13P
*Not all applications are suitable for wireless communication. Rated range is approximate, and may vary depending on factors such as obstruc-
tions, frequency interference, transmission technology, and weather. The figures listed assumes ideal conditions are present.