Miller OM-286308A, Руководство пользователя

Страница: 23 / 36

OM-286308 Page 17
5-9. Wireless Hand Control Operation
! Unexpected weld output can
cause electrical shock. Wireless
remote controls can turn weld out-
put on from distant locations. Dis-
connect 14-pin transceiver from
remote 14 receptacle and remove
the batteries from the wireless
foot control and/or wireless hand
control before servicing equip-
ment.
1 Wireless Hand Control
2 Pairing Button
3 Wireless Status Light Indication:
Wireless status light indication:
Solid Red = Not paired and/or lost com-
munication.
Flashing Green = Paired and communi-
cating.
Solid Amber = Pairing mode, searching
for 14-pin transceiver.
4
Contactor Output Control Button
5 Contactor Output Status Light
Contactor output status light indication:
Off = Contactor open, output off.
Solid Blue = Contactor closed, output on.
6
Increase Button
7 Decrease Button
Press and release the increase or
decrease button respectively to adjust in
1 percent increments. Press and hold the
increase or decrease button respectively
to adjust in 5 percent increments.
8
Menu Button
Press the menu button to select per-
centage, amperage, or voltage. The
selected parameter is shown on the
display screen.
.
Some welding power sources are not
equipped with amperage and voltage
feedback, and the wireless hand
control can be used to display am-
perage and voltage.
9 Display Screen
Displays selected parameter:
Percentage, Amperage or Voltage.
The display screen stays illuminated
while the contactor output status light is
Illuminated solid blue. To extend battery
life, the display screen, wireless status
light, and contactor output status light
turn off after 10 seconds of inactivity if the
contactor is open, output is off.
.
Displayed amperage and voltage
values are for reference only and
may not accurately reflect the true
amperage and voltage output value.
1
5
9
6
7
4
8
= Percentage
= Amperage
= Voltage
P
A
V
PAIR
= Pair Mode
Ref. 805626-A
Front
Top
3
2