Miller Ag-Bag G6170, Руководство оператора

Страница: 24 / 96

18
Fasten the backstop slings.
1. Fasten the backstop slings to the sides of the backstop. Make sure you connect both sides of
each sling.
2. Attach the sling to the backstop bracket using the 5/8 x 5" hardware (nuts and bolts).
3. Connect the slings on the backstop to the cables. Connect both sides.
4. Insert the transport suppor ts into the tubes in the tunnel floor. Fasten in place with 3/8 x 3-1/2”
bolts.
5. Place the backstop into the transport supports. Install the 1/2 x 7” bolts to secure the backstop
into the transport supports.
6. Use the cable rewind hand crank to tighten the cables to hold the backstop in position. On
baggers with hydraulic cable rewind, the hand crank can be attached to the right hand cable
drum. Use the hydraulic hand pump to apply pressure to the cable brakes and close the
needle valves to hold cables in position.
Backstop Sling
(Lower Shown)
Backstop Sling
Hook
Cable
Transport
Support