Miller Ag-Bag G6170, Руководство оператора

Страница: 28 / 96

22
Changing Wheels and Hitch To Bagging Position
NOTE: Backstop must be placed at the starting location of the bag, but bagger must be on a level
site to move wheels and hitch.
Remove the backstop from the transport position. Remove the support feet from the lower part of
the tunnel. Place support feet into the pockets on the backstop and allow backstop to stand behind
tunnel as described on previous page
Moving the first wheel
IMPORTANT: Site for moving wheels must be level to prevent bagger from rolling when un-
hitched from the tractor. Ground conditions must be firm to prevent lift jacks from settling
during wheel removal.
1. Remove the pin and rotate the lift jack on the tow hitch to the down position. Fasten the lift jack
to the tow hitch in the down (lifting position).
2. Crank the lift jack all the way down to the ground.
Lift Jack
Support Feet
Backstop In Transport
Position
Tow Hitch
Lift Jack In Stored Position
Lift Jack In Down Position