Miller Ag-Bag G6170, Руководство оператора

Страница: 66 / 96

60
Lubrication And Maintenance
Tire Air Pressure
Interval: Daily
Check and maintain the proper air pressure. Check the air pressure daily.
Maintain the following pressure:
LT 265/75R x 16 ........................................... Pressure Cold 80 psi
Wheel Lug Nut Torque
Torque each wheel lug nut per the specifications below. Check the lug nut torque and retorque after
each 10 miles of highway use until the torque stabilizes. Check monthly thereafter.
Maintain the following lug nut torque:
9/16” Wheel Studs ........................................ 100 ft.-lbs
Rotor Bearings
Interval: Per Bag
Each rotor bearing is greased by using a remote mounted grease fitting. One grease fitting is
located on the drive end next to the rotor chain adjusting rod. The other grease fitting is located on
the other end of the hopper below the conveyor.
Wipe off each fitting before attaching the grease gun. Grease each rotor bearing 10 pumps of
grease per bag. Five pumps at the start of each bag and five pumps approximately half way
through the bag.
Rotor Bearing Grease Fitting
Drive End
Rotor Bearing Grease Fitting
(Under Conveyor)