Miller Ag-Bag G6170, Руководство оператора

Страница: 38 / 96

32
Seal The Beginning End Of The Bag
1. Pull enough bag to apply the seal. Pull from the inside folds, not the outside folds (white on the
outside, black on the inside). Make sure you pull the bag under the bag bungee cord.
2. Seal the end of the bag using one of the two following methods:
a. Using the Master Seal ® . Follow the instructions that are included with the Master Seal.
Master seal and tool (Zip Tool Part Number 42.1500273) are available from your Ag-Bag
dealer. See list below for your size bag:
- Part Number 42.1500272 - 250 Ft. Roll
- Part Number 42.1500270 - 9.5 Ft. Lengths, 4/Box
- Part Number 42.1500267 - 14.5 Ft. Lengths, 4/Box for 9 ft. bags
- Part Number 42.1500268 - 17 Ft. Lengths, 4/Box for 10 ft. bags
- Part Number 42.1500269 - 20 Ft. Lengths, 4/Box for 11 & 12 ft. bags
b. Use a double knot tie. Find the end of the bag, gather the bag to the center. Twist the bag
tight and tie the bag tight. Leave enough bag to fold over and tie a second time giving the
bag an air tight seal.
3. Slide the excess bag back onto the tunnel and bag pan. Position the knot approximately knee
high.
Master Seal Tool
Master Seal
First Tie
Fold Over & Tie Again