Miller Ag-Bag G6170, Руководство оператора

Страница: 54 / 96

48
Secure Backstop To Tunnel
1. Place the backstop support feet into the sockets inside the tunnel. Secure the support feet in
place.
2. Connect the slings to the backstop and the cables. Using the bag boom, lift the backstop up
and place in the ears of the support feet. Secure the backstop to the support feet with the exist-
ing hardware. Manually rewind the cables until the backstop is tight against the tunnel. Set the
cable drum brake pressure at 1000 psi to hold the cables in place. Close the needle valves to
hold the brake pressure.
3. Remove the bag boom cable from the top of the backstop and hook the cable end into the loop
at the top of the tunnel. Use the winch to snug up the cable.
4. Use the long bungee cord to tie the bag cradle to the top of the tunnel.
5. Use wire or rope and tie the bag pan up against the bottom of the tunnel. Do not rely solely on
the bag pan bungee cords to hold the bag pan up.
Backstop Sling
Hook
Cable
Transport
Support