Special functions
Version 5.0 - 10/2018
Operating Manual Sintering Oven HTS-2/M/Zirkon-120
Page 31
Special functions
Sintering with ventilation
This additional function is used for extra ventilation of the combustion cham-
ber during the sintering process, this having a positive effect on the oxida
-
tion process.
This function is only possible with program slots 15-20.
Preliminary drying without sintering
During the preliminary drying, the oven door remains open one large gap
in the first program level
S1
. Preset program slots are provided by default
for the preliminary drying. As a result, you can only perform this function on
these slots. The special function is only active on slots
21-25.
Values may only be entered in level
S1
for the preliminary drying without
sintering. No values are assigned to levels
S2-S4
for holding temperature
and holding time. If value are nevertheless to be set for levels
S2-S4
, these
must be reset to “0”.
Only the holding time can be changed in level S1!
Preliminary drying with sintering
The same function is usually saved for the preliminary drying with sintering,
as for the preliminary drying without sintering. This means the oven door
remains open one large gap in the first program level
S1
during the prelim-
inary drying. Consequently this special function is also saved on program
slots 21-25. To add sintering to this function, the desired values are also set
in levels
S2-S4
.
min
min
min
min
