manualshive.com logo in svg

MIHM-VOGT HTS-2/M/Zirkon-120, Руководство по эксплуатации

Поделиться
Скачать
MIHM-VOGT HTS-2/M/Zirkon-120 Скачать руководство пользователя страница 13

Technical description

Version 5.0 - 10/2018

Operating Manual Sintering Oven HTS-2/M/Zirkon-120

Page 13

Certification

CE Mark

This product bears the CE mark in line with the provisions of Directive 
2006/42/EC (Machinery Directive).

CAUTION

CE mark with connected products!

Products that are connected to this product must also bear the CE mark. 
These products must be test in accordance with the respective standards.

We declare conformity for sintering oven HTS-2/M/Zirkon-120 based on the 
following standards:

 

y

Safety: EN 61010-1:2010 and EN 61010-2-010:2014

 

y

EMC: EN 61326-1:2013

 

y

Risk assessment and risk reduction EN ISO 12100:2010

EAC Certification

The Eurasian Economic Community Conformity Mark

Certificate number  ЕАЭС N RU Д-DE.АД75.В.02156

RoHS Conformity

This symbol indicates that this product does not contain any poisonous or 
dangerous substances and can be recycled after disposal, and should not 
be thoughtlessly discarded.

Содержание HTS-2/M/Zirkon-120



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды