Initial commissioning
Version 5.0 - 10/2018
Operating Manual Sintering Oven HTS-2/M/Zirkon-120
Page 27
4.
Enter the holding time in minutes using the numerals 0-9.
Notice
The maximum programmable holding time is 999 minutes.
Â
After all three values have been entered, the programming for heating
level 1 is completed.
Programming levels S2 to S4
To program further heating levels, follow the steps from the first heating level
with the corresponding heating level button (e.g.
S2
for the second heating
level,
S3
for the third heating level, etc.).
If you do not require all 4 heating levels, the temperature must be set to zero
in the level not used.
Level
S1
to
S3
can be at zero.
Level
S4
controls the door opening temperature and must be entered.
Saving the heating program
The
sintering oven
can save up to 30 different heating programs.
Saved heating programs are also retained after switching off the
sintering
oven
.
A heating program is always saved under the program number under which
it was previously loaded.
1.
Press the
Save
button.
Â
The
SAVE
menu is displayed.
2.
Press the
S2
button for “YES” to save the heating program.
3.
Press the
S1
button for “No” to cancel the saving.
min
min
S2
S1
