Page 28
Operating Manual Sintering Oven HTS-2/M/Zirkon-120
Version 5.0 - 10/2018
Initial commissioning
Linear cooling
Notice
The sintering oven enables linear cooling by automatically opening the
oven door incrementally below 1200°C. For this, the cooling phase must
be programmed in level 4 (and level 3 for multistage cooling phase).
The oven door is only opened fully after the end of the program.
Saving the heating program with a name
To uniquely identify a specific heating program, it can be saved with a name
you can freely choose.
1.
Press the
Save
button.
Â
The
SAVE
menu is displayed.
2.
Press the
Function
button to change the first letter.
Pressing this button repeatedly toggles through the alphabet from A
to Z.
3.
Press the
S4
button to skip to the next letter.
4.
After you have entered the desired name, press the
S2
button to
save the changes.
min
min
F
S4
S2
