Page 16
Operating Manual Sintering Oven HTS-2/M/Zirkon-120
Version 5.0 - 10/2018
Installation
Installation
Installation location
The
sintering oven
is designed as a table-top unit. A level surface of at
least 50 cm x 60 cm that supports a load of up to 80 kg is recommended to
ensure stability.
Installation conditions
►
Always install the
sintering oven
in dry rooms that are as dust-free
as possible and make sure that liquids cannot penetrate the unit.
►
Highly inflammable and combustible gases and liquids must not be
stored in the installation rooms.
►
Do not place any combustible and inflammable objects near the
sin-
tering oven
.
►
Keep a distance of 50 mm around the sintering oven for sufficient
cooling.
Caution
Tipping loads!
Supporting surface with an insufficient load-bearing capacity.
When installing the
sintering oven
, make sure that the supporting sur-
face has a sufficient load-bearing capacity
.
Caution
Risk of injury due to oven weight!
Physical strain/back injuries due to the high inherent weight.
h
Have at least two persons carry/move the
sintering oven
together
(max. 30 kg load bearing capacity/person).
Caution
Risk of overheating!
Overheating due to blocked air inlets
h
Make sure that the air vents remain clear on all sides.
1.
Align the supporting surface horizontally.
2.
Place the
sintering oven
on the supporting surface.
$
Make sure the surface is non-slip.
$
Lift and carry the sintering oven only at the unit base.
