Page 30
Operating Manual Sintering Oven HTS-2/M/Zirkon-120
Version 5.0 - 10/2018
Initial commissioning
Starting a heating program automatically
The
Sintering Oven
can be programmed via an integrated timer so that it
finishes the heating program currently loaded at a specific finishing time.
The integrated timer is used to specify the day and time at which a program
should finish.
1.
Select a heating program.
2.
Press the
Finishing time
button.
Â
The
AUTOSTART
program opens.
3.
Press the
S1
button to enter the day of the week.
Set the days of the week using buttons 1-7 (1 = Mon, 2 = Tue,
3 = Wed, etc.).
4.
Press the
S1
button again to skip to the time entry.
5.
Set the hours using buttons 0-9.
6.
Press the
S1
button to change to the minutes display.
7.
Set the minutes using buttons 0-9.
Â
The timer is activated.
Â
The finishing time as well as the calculated switch-on time are shown
in the display.
min
min
S1
S1
S1
min
min
