Problem solving guide
81
Problem
Cause and remedy
The sensor controls do
not respond.
You have selected the
Display
|
QuickTouch
|
Off
setting.
When the oven is switched off, the sensor controls do not
respond.
As soon as the oven is switched on, the sensor
controls will respond. If you want the sensor controls to
respond even when the oven is switched off, select the
Display
|
QuickTouch
|
On
setting.
The oven is not connected to the power supply.
Check that the oven plug is correctly inserted into
the socket and switched on.
Check whether the fuse has tripped. Contact a
qualified electrician or the Miele Customer Service
Department.
There is a fault with the controls.
Touch and hold the
On/Off sensor control until
the display switches off and the oven restarts.
Power cut
appears in the
display.
There has been a brief power cut. This has caused
the current cooking programme to stop.
Switch the oven off and then back on again.
Restart the cooking programme.
12:00
appears in the dis-
play.
The power supply was interrupted for longer than
150 hours.
Reset the time and date.
Max. op. hours reached
ap-
pears in the display.
The oven has been operating for an unusually long
time. This has triggered the safety switch-off
function.
Confirm with
OK
.
The oven is now ready to use.
Fault F32
appears in
the display.
The door lock for pyrolytic cleaning has not locked.
Switch the oven off and then back on again. Start
the pyrolytic cleaning programme again.
If the message appears again, contact the Miele
Customer Service Department.
Fault F33
appears in
the display.
The door lock for pyrolytic cleaning has not opened.
Switch the oven off and then back on again.
If the door lock still does not deactivate itself,
contact the Miele Customer Service Department.