Features
23
Fitting the FlexiClip runners
Risk of injury caused by hot
surfaces.
The oven gets hot during operation.
You could burn yourself on the
heating elements, oven compartment
or accessories.
Allow the heating elements, oven
compartment and the accessories to
cool before fitting or removing the
FlexiClip runners.
Preferably fit the FlexiClip runners onto
level 1. You can then use them for food
which should be cooked on level 2.
One level of the side runners consists of
two rails. The FlexiClip runners are fitted
on the upper rail of the two rails that
make up a shelf level.
The FlexiClip runner with the Miele logo
is fitted on the right.
When fitting or removing the FlexiClip
runners,
do not
extend them.
Hook the FlexiClip runner onto the
front of the top rail of a side runner
(1.).
Then hold the FlexiClip runner at an
angle towards the middle of the oven
compartment (2.).
Slide the FlexiClip runner at an angle
along the top rail as far as it will go
(3.).
Then swing the FlexiClip runner back
to the side of the oven compartment
and secure it to the top rail with an
audible click (4.).
If the FlexiClip runners are difficult to
pull out after fitting, you may need to
pull firmly on them once to release
them.
