Microscan Quadrus EZ, Руководство пользователя, Страница: 75 / 366

Quadrus EZ Reader User’s Manual
3-21
Read Cycle
Triggered Capture
Notes on Triggered Capture Mode:
1. Trigger Mode <K200> must be set to Edge, Serial, or Serial & Edge. If set to
Level, Triggered Capture Mode will operate the same as Timed Rapid Capture
mode.
2. For End of Read Cycle settings <K220>:
a) If set to Timeout or New Trigger & Timeout and a timeout occurs before number
of capture have been met, it will abort the read cycle and disregard the remaining
number of triggers.
b)
If set to New Trigger, the reader remains in the read cycle until the number of
captures is satisfied and an additional trigger is received indicating both the end
of the read cycle and the start and first capture of the next read cycle.
Triggered Captures, Typical
Usage:
Useful in applications where delays between captures can be controlled by
triggers rather than preset time delays.
Definition:
When enabled the reader will stay in the read cycle until either the user-
defined number of captures has been met or, if configured, a timeout
occurs.
Processing
Read cycle
ends on New
Trigger or Tim-
eout, as config-
ured.
Captures on every trigger
Capture
First trigger
starts the read
cycle