Microscan Quadrus EZ, Руководство пользователя, Страница: 51 / 366

Quadrus EZ Reader User’s Manual
2-25
Communications
Postamble
Postamble Status
Postamble Character(s)
Usage:
Useful for identifying and controlling incoming data. For example, defining
the postamble as a carriage return and a line feed causes each decoded
message to be displayed of on its own line.
Definition:
Allows the user to enable or disable up to four postamble character(s) that
can be added to the end of the decoded data.
Serial Cmd: < K142,status ,postamble character(s)>
Default: Enabled
Options: 0 = Disabled 1 = Enabled (within any protocol)
Serial Cmd: < K142, status, postamble character(s) >
Default:
^M^J . Corresponds to carriage return/line feed/null/null, as displayed in the
menu.
Options:
Up to four user-defined ASCII character, including control characters.
Within a Serial Command
To enter control characters within a serial command, hold down the control
key while typing the desired character.
Example: <K142,1,CNTL-m CNTL-j> to enter ^M^J .
Within an Embedded Menu
Control characters entered on the command line are displayed in the menu
as mnemonic characters, such as:
<CR><LF><NUL><NUL>
To enter a control character from within an embedded menu, first type in a
space (with the space key). This has the effect of allowing the control key to
be recognized as a part of the control character. Next hold down the control
key while typing the desired character.
Example: Space CNTL-m Space CNTL-j to enter ^M^J .