Microscan Quadrus EZ, Руководство пользователя, Страница: 147 / 366

Quadrus EZ Reader User’s Manual
5-31
I/O Parameters
Statistic Mode 1 (counts) (Image Captioning)
Outputs trigger count, image frame number, decode status, running read rate, good read/
match count, noread count, and mismatch count. Count values are total number since
reset.
Format:
DECODE T/XXXXX V/XXXXX
XXX% F/X N/XXXXX
Where:
Important:
• If Match Code is disabled, the Mismatch count will not be displayed.
• Read rate is calculated as a running average.
Statistic Mode 2 (timing) (Image Captioning)
Indicates timing information including processing time required for displayed image and
total read cycle time. Also included is Decode status and image frame number.
Format:
TOTAL READ TIME = XXXXX ms (if decoded) or STATUS (if a noread)
F/X READ CYCLE = XXXXX ms
Where:
DECODE = Decode status: “DECODE” or “NOREAD”
T/ = Trigger count 0 - 65535 (5 digits)
V/ = Good read / Match count 0 - 65535 (5 digits)
% = Read rate 0 - 100 (3 digits)
F/ = Image frame number 0 - 7 (1 digit)
N/ = Noread count 0 - 65535 (5 digits)
X/ = Mismatch count 0 - 65535 (5 digits)
Total Read Time = Processing time required for displayed image (1ms resolution).
1 to 65535ms (up to 5 digits)
Status = Decode status is a NOREAD
F/ = Image frame number 0 - 7 (1 digit)
Read Cycle = Total read cycle time (1ms resolution).
1 to 65535ms (5 digits)