manualshive.com logo in svg

Micronics 09-00232 Series, Руководство пользователя

Поделиться
Скачать
Micronics 09-00232 Series Скачать руководство пользователя страница 65

Installing Video Drivers

6-9

WordPerfect (for DOS) 5.x and 6.0

WordPerfect Versions 5.0 and 5.1

The mach64 drivers for WordPerfect 5.x support 800x600 and 1024x768
screen resolutions in 16 colors.  Perform the following steps to install driver
using WordPerfect Versions 5.0 and 5.1:

1.

Run WordPerfect to ensure it is properly installed before continuing with
this procedure.

2.

Run the mach64 installation program and SELECT DRIVERS INSTAL-
LATION from the Main Menu.

3.

From the list of applications, select WordPerfect.

4.

When prompted, insert the disk and enter the source drive and directory
information of the disk.

5.

When asked, enter the directory where WordPerfect is installed.  Press
<Enter> to copy the necessary driver files to that directory.

6.

When driver installation is completed, press <Esc> to exit.

7.

Run the WordPerfect Setup program to select this enhanced driver, as
follows:

a)

Run WordPerfect, press <Shift><F1> for the Setup option.

b)

Press <D> for Display.

c)

Press <G> for Graphics Screen Type.

d)

Select the mach64 driver and press <Enter>.

Содержание 09-00232 Series




























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды