manualshive.com logo in svg

Micronics 09-00232 Series, Руководство пользователя

Поделиться
Скачать
Micronics 09-00232 Series Скачать руководство пользователя страница 49

5 - 3

Quick Setup-Sets the card to an optimal configuration using the information
acquired during system checking.

Drivers Installation-Installs enhanced graphics and multimedia drivers for
popular operating system checking.

Diagnostics-Tests the proper functioning of your card in both VGA and
accelerated display modes.

Advanced Setup-Should only be attempted by experienced computer users.
Although some settings may improve the performance of your card, they may
not be fully compatible with your system or specific software applications.

System Information

This program checks the system for possible conflicts and displays the card
configuration in the INFO BOX.  If a conflict exists, it issues a warning and
suggests possible corrective actions.  Perform the following steps to check
your system:

1.

From the Main Menu, select SYSTEM INFORMATION by highlighting
the selection and pressing <Enter>.

2.

Review the information in the INFO BOX and take any necessary action
as directed.

Quick Setup

You must specify a monitor in QUICK SETUP.  Proper monitor selection is
necessary for correct resolution and refresh rate operation.  Information on
display modes supported by the highlighted monitor are displayed in the INFO
BOX.  Perform the following steps to install the monitor type:

1.

Select QUICK SETUP from the Main Menu by highlighting the selection
and pressing <Enter>.  A Monitor Selection Menu will appear (see Figure
5-2).

2.

Using the <

↑

/

↓

> keys, scroll the monitor list to highlight your monitor.  If

found, press <Enter> to select.  If your monitor is not listed, follow step a)
or b) described below:

a)

If a VESA Display Information Format (VDIF) file is available
for your monitor, INSTALL can read it and get the necessary
parameters to set up the card for optimal monitor operation.  To
do so, insert the disk containing the VDIF file into your floppy
drive.  Select READ VDIF... from the Monitor Selection Menu.

Installing Graphics Accelerator Software

Содержание 09-00232 Series




























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды