manualshive.com logo in svg

Micronics 09-00232 Series, Руководство пользователя

Поделиться
Скачать
Micronics 09-00232 Series Скачать руководство пользователя страница 40

Setup

The Setup procedure is built into the system.  Setup begins after the system is
powered up.  Once the system is powered up and goes through a memory test,
the following screen appears on your monitor:

Figure 4-1  Power-Up Screen

If the systems detects a configuration error, it displays an error message.  After
the error message, another message displays indicating the choice to “press
<F1> to continue (boot up), or <F2> to run the Setup procedure.”  Normally,
you will press <Ctrl>, <Alt>, and <Esc> simultaneously to begin the Setup
procedure.

Running the Setup Procedure

Upon pressing <F2>, the CMOS Main Screen (Figure 4-2) will appear and the
prompt will be on the time line.  If the Power-Up Screen does not appear but a
DOS prompt does (i.e., A:\ or C:\), press the <Ctrl>, <Alt>, and <Esc> keys
simultaneously to begin the Setup procedure.

Micronics LPM30 System Board Manual

4-2

Содержание 09-00232 Series




























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды